The Neck Angle Jig speaks for itself, precisely aligning the neck angle in respect to the body and then routing out the appropriate joints.. The tool comes with a Edge vise that is specificly designed to work with the jig, the templates and accessories are sold seperatly
Neck Angle Jig $899.00
(templates are sold separately)
A "Template set" is a pair of matched templates for the body and neck. Templates are made from aluminum
All templates are designed for a 5/8 OD template guide. This fixture is to be used with a 1/2" collet router and a 7" diameter base . We recommend using a 1/2" spiral down cut bit for the Mortis and Tenon templates and a 7 degree Dove Tail bit with a 1/2" shank for the Dove Tail and Arch Top templates. Template guides and router bits are sold separately
Length 24"
Width 10"
Depth 13"
Weight 18 lbs
Side to side angle 4 degree
Neck angle 8 degree
Guide pins for the truss rod slot is 1/4" in diameter. Other diameters available at $15.00 per set. Must specify diameter when ordering.
Dial Indicator height adjustment
Neck angle and side to side adjustment
Dial Indicator adjustment
Clamp re-location adjustment
Edge vise template adjustment
Edge vise perpendicularity adjustment
